software creative
Winter is almost here. Bruce and I’s snow trip is only a month or two away. I pulled the pulk out from storage and fabricated stabilizing runners on the bottom from two inch aluminum that is available at Home Depot. Two bolts for each runner hold it in place nicely. I’m unsure if I want to locktite those or not. Being able to take them off could come in handy, but the chance of losing the bolts is pretty high.
I had a 0.5 inch piece of acrylic scrap from Tap Plastics. I traced the nose and cutout the curve, then bolted the flanges from fixed caster mounts. I used these 2 inch casters from Amazon.
Started building my home made pulk. Bruce picked up a couple sleds from Target. I am trying CPVC under the rim to spread the load when being pulled and add some rigidity. I picked up some fixed casters from Amazon. After the wheels removed the bolt (axel) can be put back in place. I will use these as the anchor points.
