This past summer, I ordered a MiniKits M1 modular transceiver kit. This kit packages each section onto a separate circuit board, for future modifications. Work at on1 was super busy, so I put off assembling the kit until the Christmas holiday. I did not purchase the MiniKits PIC based control and DDS system. I am going to use a si5351 with an Atmel ARM chip for digital control. I had pcbs.io manufacture a pcb with a super nice Bourns optical encoder for the main frequency dial.
The modules I purchased are:
- EME208
- EME207-20m
- EME207-40m
- EME211
- EME209-19m-30m
- EME206
- EME210
- EME201
- EME202
- EME203-9m-2.5k
